What Are the Glass Door Patch Fitting Manufacturer and How to Install Them?

A glass door clip is a hardware accessory that is fixed on the edge of a glass door to install other components. Now there are various types of glass door clips on the market, such as curved clips, one-word clips, top clips, etc., and the materials are also different, but generally speaking, they are mainly made of stainless steel. So how are the glass door clips installed? The steps are detailed as follows:

Step1: Positioning and laying out

The glass door is combined with fixed glass and movable glass door, and the positioning line is unified. According to the requirements of the design and construction drawings, the positioning line of the glass door is released, and the position of the door frame is determined at the same time.

Step2: Installation of the limit slot at the top of the frame

The width of the limit groove should be two to four millimeters greater than the thickness of the glass, and the groove depth should be ten to twenty millimeters. During installation, at the beginning, two metal decorative board edges are drawn from the center line, and then the limit groove at the top of the door frame is installed according to the edge line, and the groove depth in the groove is adjusted by the glued backing plate.

Step3: Wood base bracket installation with metal finish

Fix the square wood to the ground and glue the metal veneer to the wood with all purpose glue. If the aluminum alloy square tube is used, it can be fixed on the frame column with aluminum corners, or fixed on the wooden brick buried in the ground with wood screws.

Step4: Vertical door frame installation

Connect the center line of the bomb to the door frame square wood, then use plywood to determine the shape and position of the door frame column, and finally wrap the metal decorative surface. When wrapping the veneer, place the face-to-face seam on the middle door on both sides of the glass.

Step5: Install the glass

Use the glass suction cup machine to suck the thick glass tightly, lift the thick glass plate and move it to the installation position. First insert the upper part of the glass into the limit slot at the top of the door frame, and then put the lower part of the glass on the bottom bracket.

Step6: Fix the glass

Nail two small square wooden strips inside and outside the bottom bracket to clamp the thick glass to the middle door, apply all-purpose glue on the square wooden strip and glue the veneer metal to the square wooden strip.

Step7: Inject glass glue to seal

Inject glass glue to seal on both sides of the top limit groove and the bottom bracket opening, as well as the gap between the thick glass and the frame column, and scrape off the excess glass glue with a tool.

Step8: Glass docking

When the fixed part of the glass door needs to be spliced due to its large size, the width of the seam should be 2 to 3 mm, and the edge of the glass plate should be chamfered.

So how should we purchase glass door clips? First of all, you must choose a manufacturer with a good reputation and have its own factory, so as to ensure the high quality of the glass door clip. For example, Ally hardware accessories manufacturer has a workshop of 12,600 square meters and more than 150 employees; it has workshops such as die casting, mold, polishing, stamping, installation and packaging, and has a professional technical team to ensure the highest quality of products.